ALLIANCE Speed Queen Uživatelský manuál stáhnout pdf (Strana 17)

Programming MDC

200944

3. Coin #2 Amount “dEn2”

This option allows the owner to set a specific

numerical value for a coin entered when using the dual

coin drop. For example, the coin value for a dollar coin

would be measured in cents (100). Therefore, the coin

amount entered for one dollar coin would be 0100.

If the vend price (option 1) is set for “200”, and the

coin amount is set for “0100”, the vend price displayed

will decrease by 100 for each coin entered.

How to Program Coin #2 Amount

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the PERM PRESS/WARM (∧) or the

DELICATES/COLD (∨) keypad until “PrOg”

appears in the Four-Digit Display.

Figure 11

3. Press the START (enter) keypad and “AtS” will

appear in the Four-Digit Display.

4. Press the PERM PRESS/WARM (∧) or the

DELICATES/COLD (∨) keypad to scroll through

the programmable options until “dEn2” appears

in the Four-Digit Display.

Figure 12

5. When “dEn2” appears in the Four-Digit Display,

press the START (enter) keypad. There are four

digits in Coin #2 Amount, and the fourth digit

will become the active digit. The active digit will

flash one second on and one second off.

Figure 13

NOTE: The coin amount can be set from 1 to 9999.

6. Press the PERM PRESS/WARM (∧) or the

DELICATES/COLD (∨) keypad to increase or

decrease the value of the active digit and the

START (enter) keypad to enter the value of the

digit and advance to the next digit.

7. Repeat step 6 for each of the four digits. When

the START (enter) keypad is pressed and the last

digit is the active digit, the changes to the coin #2

amount will be saved into the memory. The next

option, “PLSE”, will appear in the Four-Digit

Display.

NOTE: To program “PLSE” (Start Pulse Value),

refer to option 4. To program other options, refer to

the appropriate section.

How to Exit Programming Feature

1. Be sure the control shows a programmable

option, not a value.

2. While pressing and holding the NORMAL/HOT

keypad with one hand, press the NORMAL/

WARM keypad with the other hand. The control

will revert back to the previous mode of

operation.

COM1R

DRY553R

COM4R

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Komentáře k této Příručce

Žádné komentáře

ALLIANCE Speed Queen Uživatelský manuál Strana 17

Komentáře k této Příručce

Související produkty a manuály pro Pračky ALLIANCE Speed Queen